Storage shelves at times provide wonderful utility for homes. However, those commercial shelving units could not only be costly, but could also maximize the use of space. On the other hand, conventional storage shelf could not only be built in an economical way of doing, but also by taking advantage of every inch of the accessible space. So, since building your own shelf could be the most practical way to save your money while having a well-organized home, here are some of the guidelines that you can easily follow:
Determine the place wherein you would like to put the storage shelf. Measure the area and the items that you would like to put on after you have completed the measurement. Keep in mind that with these measurements, you have to know the width, depth, and the distance between the shelves, kind of material and even the distance of the shelf between your ceilings. If you were to use simple freestanding shelves, you can build it by just using planks, 1x1 strips and a screwdriver. The thickness of the plank is also essential and it depends on the items that you would like to put on it. If you use thin planks, shelves will simply bow under the weight that will be put upon it. For instance, if you are making bookshelves that are only about three to four feet wide, the right width of the plank must be at least 10 inches and its thickness must be 1 inch. If it's of for storing can foods and any food items, you can use 4-width with ¾ inches thickness plank. Cutting out the vertical board is the next thing that you have to do, as it will form the unit sides into length. Measure the designated distance between the shelves and ensure that you mark the vertical boards. Cut the piece one at a time and make it long enough to the vertical boards as well as the pieces that are needed or every shelf. After then, you need to screw the pieces securely into the place on the two vertical boards at the place that you have been marked earlier for your shelf positioning. You need to make sure that it is straight same line with the other one, as this will serve to be the support for every shelf into your storage unit. Cut up the board of the shelf wherein the length will be the end its end width. This thing will be attached at the top ends of the vertical planks that form the top unit level. Lastly, cut the shelves that will span out the sides of the shelf and start it from the bottom, until you have reached the top. Every shelf must be positioned on their one by one supports and ensures that they are securely screwed into the place.
Shelf Unit Storage
Building your own storage shelf is not a hard thing to execute. Following those guidelines mentioned above could totally help you out.
Bar Stools Kitchen Counter Compact Slr Cameras Bookshelf With Storage